Browse Items (37 total)

  • Tags: Materials

Offshore wind energy (OWE) shows rapid growth in reducing CO2 emissions. Although OWE is considered renewable several used materials in their activities, such as manufacturing, installation, maintenance, and dismantling of the wind farms, generate…

Using data mining's decision tree classification, DBSCN cluster analysis, and K-nearest neighbor algorithm realizes the information mining of natural gas pipeline leak, and alse uncovers the objective laws behind the natural gas pipeline…

The Australian Capital Territory (ACT) has legislated and aims to be net zero emissions by 2045. Such ambitious targets have implications for the contribution of hydrogen and its storage in gas distribution networks Therefore, we need to understand…

The course mainly states the characters of oil production sewage and the study of formation causes

This paper demonstrated the biological mechanism of paleokarst developed within the Ordovician formation in the Ordos Basin. An experiment in laboratory was designed for understanding the water-rock interaction with sulfate-reducing bacteria. The…

The world depends on oil for much of its energy needs and global demand for oil is forecast to increase significantly in the future as countries such as China and India continue to develop [1]. Much of the world's conventional or “easy” oil sources…

Based on the wave equation of longitudinal vibration, the simulation model of cyclic stress properties for sucker rod is proposed. The regression model for stress concentration factor of rods with defects is established by the finite element method.…

Monitoring the integrity of structures in the oil and gas industry is a mandatory task that helps preventing both natural disasters and economical losses. This paper presents the optimization of the geometry of a magnetic circuit for the detection of…

Corrosion of oil tubular goods is becoming more and more serious in the exploitation of oil and gas wells, so it is very significant to study new anti-corrosion materials of lined steel pipe. Aiming at the mechanical problem of lined steel pipe…

Plugging technology near launcher & receiver, which is used to replace the section of pipeline near launcher & receiver or block valve, refers to put plugging head into the specified location from launcher & receiver by the push rod to complete…

In the field of industrial ultrasonic testing, ultrasonic thickness measurement (UTM) is a method of performing non-destructive measurement of the local thickness of a solid element basing on the time taken by the ultrasound wave to return to the…

Using data mining's decision tree classification, DBSCN cluster analysis, and K-nearest neighbor algorithm realizes the information mining of natural gas pipeline leak, and alse uncovers the objective laws behind the natural gas pipeline…

An estimation of GHG emission of waste cooking oil recycling producing bio diesel fuel, was undertaken in comparison with a complete use of cooking oil, the former is currently promoted in Bogor City, Indonesia, while the latter is commonly practiced…

The world depends on oil for much of its energy needs and global demand for oil is forecast to increase significantly in the future as countries such as China and India continue to develop [1]. Much of the world's conventional or “easy” oil sources…

A warehouse layout problem under fuzzy random environment is considered, in which different types of materials need to be placed in a warehouse so that the total transportation cost is minimized. For convenience of handling, the materials in the same…

Over the years, optical fibers and fiber-optic based sensors have seen increased acceptance and widespread use for a variety of industrial, civil, process control, and defense applications. Given their EM immunity, intrinsic safety, small size &…

Tags:

With China's rapid economic development, the oil as a strategic resource has become increasingly important. As a source of industry, the volatility of oil price affects the interests of many downstream industries, so studying of the effects of…

This paper demonstrated the biological mechanism of paleokarst developed within the Ordovician formation in the Ordos Basin. An experiment in laboratory was designed for understanding the water-rock interaction with sulfate-reducing bacteria. The…

Tags:

The course mainly states the characters of oil production sewage and the study of formation causes

The renewable energy network is constantly expanding due to the increasing world demand to reduce greenhouse gases emissions and to maintain an adequate energy supply level. However, renewable energy systems are facing two major difficulties: storing…

This paper introduces the fundamental structure design and operation principle of skid-mounted fueling station for LNG (liquefied natural gas) vehicles, with highlights on the description of structure and main technical parameters of three primary…

The extremely high temperature and high pressure endurable (250°C/30 kspi) SOI based temperature sensor and voltage regulator module was developed for harsh environment application such as deep sea, oil & gas down-hole drilling and aerospace engine…

The Sulige Gas Field in the Ordos Basin operated by the PetroChina Changqing Oilfield Company is one of the typical tight sand gas fields with low single-well productivity, difficult-to-control surface engineering investment, high pressure drop rate…

The scope of this study is concerned with the petroleum supply network operated by a typical oil company, in which the crude oil is consumed to produce ethylene, propylene, liquefied petroleum gas, butadiene, benzene, toluene, xylene, gasoline,…

The petroleum industry has focused on the modification of crude oil composites to decrease their adhesion onto materials and thus facilitate oil extraction, transportation, storage, and processing. However, these methods such as heating, dilution,…

Spoolable pipes are of great interest in O&G industry: they offer well-known advantages like high resistance to internal and external corrosion and low roughness, high fatigue resistance, reduced maintenance cost and improved flow rates. Another…

The petroleum industry has focused on the modification of crude oil composites to decrease their adhesion onto materials and thus facilitate oil extraction, transportation, storage, and processing. However, these methods such as heating, dilution,…

Residue hydroprocessing requires a large quantity of hydrogen. The utilization of the low-cost hydrogen donor for the hydroprocessing reaction can helps to reduce the high cost of hydrogen. Generally, hydroaromatic compounds such as tetralin,…

The rapid expansion of production of North American petroleum crude oil from shale has led to a significant increase in rail transport of crude oil. Broken rails are frequent causes of train accidents. Ultrasonic rail defect inspection is widely used…

High density polyethylene nanocomposites loaded with a reinforcing filler (Cloisite 20A as a modified nanoclay) and an electrically conductive filler (Cu nanoparticles) were prepared by a melt blending method. The morphological, mechanical, thermal,…

Although underground pipelines are recognized as very safe if not the safest means of transportation for hazardous materials, France decided in the early 2000s to reinforce the regulation. As a result, pipelines operators have to produce safety…

A log-logistic probability of ignition (POI) model for ruptures of onshore natural gas transmission pipelines is proposed in this paper. The parameters of the proposed POI model are evaluated based on a total of 188 rupture incidents that occurred on…

Natural gas (NG) transmission and distribution pipelines play an integral role in the United States (US) energy infrastructure. Various incidents over the past decades have caused growing concern as to the current condition of such pipelines in the…

A commercial Fe-C material (P265GH) used for natural gas delivery and transportation systems was analyzed in H2S atmosphere in order to establish the corrosion resistance. In most of the industrial processes for gas purification the corrosion rate is…

Superamphiphobic materials are helping with urgent issues due to increasing industrial oil transportation, as well as common oil pollution, which has triggered large interest owing to their high application value and practicability. However, they are…

Maritime transportation, the primary mode for intercontinental movement of crude oil, accounts for 1.7billion tons annually – bulk of which are carried via a fleet of large crude oil tankers. Although spectacular episodes such as Exxon Valdez…

The Australian Capital Territory (ACT) has legislated and aims to be net zero emissions by 2045. Such ambitious targets have implications for the contribution of hydrogen and its storage in gas distribution networks Therefore, we need to understand…
Output Formats

atom, dcmes-xml, json, omeka-xml, rss2