CO2 corrosion is one of the most common corrosion forms in the process of oil and gas field development and oil and gas gathering and transportation. In the process of natural gas gathering and transportation, the problem of pipeline corrosion caused…
1 Scope This document specifies a method for the determination of the rust prevention characteristics of lubricating grease in the presence of a flow of an aqueous test fluid. This test method is used to assess the ability of a grease to prevent…
Emulsions are common in the oil industry, being present in the extraction and production stages. Its formation occurs with the contact of brine and crude oil under intense flow. The presence of emulsified water (dispersed droplet size, φ ≤ 50 μm) in…
AbstractThe aim of this work is to describe chemical substances contained in crude oils and fuels, the conditions in which petroleum products (fuels) are corrosive to metals
The article discusses the peculiarities of corrosion in low-pressure gas pipelines intended for collection and transportation of associated petroleum gas. It is shown that the corrosive aggressiveness of associated petroleum gas is determined by the…
According to a survey of corrosion releases in hazardous liquids pipelines, of the 52 internal corrosion releases reported in 2009-2012, 31 occurred in intermittently operated lines. Pigging operations cannot be performed in many of these pipelines…
Separating produced water is a key part of production processing for most crude oils. It is required for quality reasons, and to avoid unnecessary transportation costs and prevent pipework corrosion rates caused by soluble salts present in the water.…
Corrosivity of petroleum fractions with the same total acid value (TAN) can be much different due to chemical structure differences of acidic species. To investigate corrosivity difference and interactions between different acidic species, acids with…
The conventional process employed for the removal of N2 in a natural gas upgrading facility is cryogenic distillation (CD) and entails a significant investment outlay. Operation of the CD unit occurs at approximately 40bar and 120C, provided by a…
1 Scope This document specifies a method for the determination of the rust prevention characteristics of lubricating grease in the presence of a flow of an aqueous test fluid. This test method is used to assess the ability of a grease to prevent…
The aim of the present work is to monitor dew point corrosion of crude and vacuum distillation column overhead section in a petroleum refinery. The material of construction of overhead line pipe was carbon steel. The state of art of crude unit…
CO2 corrosion is one of the most common corrosion forms in the process of oil and gas field development and oil and gas gathering and transportation. In the process of natural gas gathering and transportation, the problem of pipeline corrosion caused…
Oil and gas exploration and production involve a wide variety of infrastructure. Among those are pipelines, which are used for crude oil, natural gas, and injection water transportation. Constructing these pipelines are costly and time-consuming…
Separating produced water is a key part of production processing for most crude oils. It is required for quality reasons, and to avoid unnecessary transportation costs and prevent pipework corrosion rates caused by soluble salts present in the water.…
AbstractThe aim of this work is to describe chemical substances contained in crude oils and fuels, the conditions in which petroleum products (fuels) are corrosive to metals
According to a survey of corrosion releases in hazardous liquids pipelines, of the 52 internal corrosion releases reported in 2009-2012, 31 occurred in intermittently operated lines. Pigging operations cannot be performed in many of these pipelines…
AbstractThe aim of this work is to describe chemical substances contained in crude oils and fuels, the conditions in which petroleum products (fuels) are corrosive to metals
According to a survey of corrosion releases in hazardous liquids pipelines, of the 52 internal corrosion releases reported in 2009-2012, 31 occurred in intermittently operated lines. Pigging operations cannot be performed in many of these pipelines…
Emulsions are common in the oil industry, being present in the extraction and production stages. Its formation occurs with the contact of brine and crude oil under intense flow. The presence of emulsified water (dispersed droplet size, φ ≤ 50 μm) in…
Separating produced water is a key part of production processing for most crude oils. It is required for quality reasons, and to avoid unnecessary transportation costs and prevent pipework corrosion rates caused by soluble salts present in the water.…
Separating produced water is a key part of production processing for most crude oils. It is required for quality reasons, and to avoid unnecessary transportation costs and prevent pipework corrosion rates caused by soluble salts present in the water.…